Lindy CPU IP Access Switch Plus Bedienungsanleitung PDF herunterladen (Seite 8)

 









Connections

Installation of the CPU IP involves a number of basic connections

to some or all of the following items:

• Host computer or KVM switch

• Local keyboard, video and mouse

• IP network port

• Modem/ISDN port

• Power input

• Power control port

COM1

MODE

COM2

POWER

CONTROL

INDOOR

USE

ONL

KVM

CONSOLE

COMPUTER

KVM

SWITCH

Host computer or KVM switch

The CPU IP can either connect directly to a single host computer or to range of

hosts via one or more KVM switches.

To connect a host computer or KVM switch

1 Ensure that power is disconnected from the CPU IP and the computer or

KVM switch to be connected.

(Note: If it is not possible to switch off devices prior to connection, then

a ‘Hot plug’ procedure is available – see the Hot plugging and mouse

restoration section for more details).

2 Connect the plugs at one end of a KVM cable set to the keyboard, video

and mouse sockets of the computer or KVM switch (for mouse plug

conversion information – see Appendix 7).

Monitor (video) Blue

Keyboard Purple

Mouse or Mid green

3 Connect the plugs at the other end of the KVM cable set to the corresponding

sockets, collectively labelled as ‘COMPUTER/KVM SWITCH’, at the rear of the

CPU IP.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Lindy CPU IP Access Switch Plus Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für KVM-Schalter Lindy CPU IP Access Switch Plus